Got a question guys, on the front fender there is a metal bracket that is riveted on the fender. It is a brake line holder, i accidently broke it while removeing the front fender and need a new one. Ive called every where (including Suzuki) and they cant find it on the schematics. Does anyone know the part # or a way to find it.

Try ask for brake hose clamp. I just looked at the service manual, it's on page 460 and 522 but no p/n. Page 522 is a front brake hose routing dia.

Here ya go, part 14 I believe?

http://alpha-sports.com/spst/2008/GSX1300BK/22.htm

Yup, looks like Part# 59261-23H00....thanks for that link Rossco. I had it back when I had the 109 and lost it....

I thank that might be it, thanks alot guys!

Got to love this forum!

I put the address in a new topic in the Info,Spec, part number section

Well, thats not the right one. Went to the dealer and they called suzuki. Found out to get that one little hose clamp you have to buy a new fender(200.00 for the center section) because it comes already attached. So I guess I will make one instead, thanks for the help any way.

It's attached by Rivots. There is no logical reason they can't sell it as a part. Someone had to attach this to the fender in the first place.

I have part 20 on the diagram that is shown above is that the part you need, when you add stainless lines you no longer need that part.

If it is the part you need let me know I will sent it to you

Busa I appreciate it but thats not the right one. I agree with wingman, you should be able to buy just that. When I took off my front fender to send to the painters I just cut the bracket off, figured I would buy a new one and replace it when I got the fender back. Guess I was wrong, kind of crappy.