First How To.
To Reset you maintenance reminder on the dash of your bike : Page 2-23 Of Owners Manual
a. Ignition off
b. Press SET switch and turn on ignition
c. Wait 3 seconds till the display repeats positive "R" mark and negative "R" three times then goes off
d. Release switch and turn off ignition
To Change Maintenance Interval Reminder : Page 2-24 Of Owners Manual
a. Turn on Ignition Switch
b. Press INFO Switch to Indicate Maintenance Interval
c. Press INFO and SET Switch for more tha 2 seconds Display sould read flashing "S"
d. Press SET to decrease value (500k or 300m steps)
e. Press INFO to increase value (500k or 300m steps)
f. Minumum Value 500k / 300m
g. Maximum Value 6000k / 3600m
h. Press both INFO and SET for more than 2seconds
Change the Date & or Time : Page 2-16 and 2-17 of Owners Manual
a. On the dash press SEL button and ADJ button simultaneously for 2 seconds (clock display will blink)
b. Adjust Hours with SEL Button
c. Adjust Minute with ADJ button
d. repeat a. to turn off
(for everyone but aussies
and canadians
)
a. set meter to show odometer
b. Press ADJ for 3 seconds
c. Select MPH or KPH as required
Job DOne
(watches as bking owners run off to check these instructions on their bikes)
Home 
